Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
PLEASE NOTE!
Remove the protective packaging before use.
1. Attach the handle (C) with 2 M6 nuts.
2. Place the housing (D) on the base (H).
Secure it with 5 M8 x 16 mm bolts.
3. Place the burner (A) on the housing (D) and secure it with
5 M5 x 1 D mm bolts and 5 M5 nuts.
4. Connect one end of the gas hose to the burner using a clamp.
Use a second hose clamp to connect the other end of the gas
hose to the regulator attached to the gas cylinder. Check for
leaks using a soapy solution.
5. Place the casing door (F) on the hinges that are attached
to the pre-assembled part of the casin and close it using
the fastening clips (E).
Publicité
Table des Matières
