Velleman LABPS6015SM Mode D'emploi page 4

4. Overview
Refer to the illustrations on page 2 of this manual.
1 on-off switch
2 output positive terminal
3 output negative terminal
4 voltage setting knob
5 current setting knob
6 voltage indication
7 current indication
5. Operation
1. Connect the load to the output terminals. Pay attention to the polarity; never reverse the polarity.
2. Plug the power supply into the mains and switch it on.
3. Adjust the voltage and current values with the voltage and current setting knobs. Make sure the load
current is less (at about 80 %) than the rated output current.
6. Cleaning and Maintenance

Disconnect the device from the mains prior to maintenance activities.

The power supply cables must not show any damage. Have a qualified technician maintain the device.

Wipe the device regularly with a moist, lint-free cloth. Do not use alcohol or solvents.

There are no user-serviceable parts, apart from the fuse. Contact your dealer for spare parts if necessary.

Store the device in a dry, well-ventilated, dust-free room.
7. Technical Specifications
input voltage .................................................................................... 220-240 V~, 50/60 Hz
power consumption ................................................................................................ 1010 W
power factor (pf) ......................................................................................................... 0.92
output voltage ............................................................................. 0-60 VDC adjustable max.
output current .................................................................................................... 15 A max.
ripple voltage ...................................................................................................... ≤ 200 mV
dimensions ........................................................................................... 336 x 87 x 214 mm
weight .................................................................................................................... 2.9 kg
fuse .................................................................................................................T 5A, 240 V
Use this device with original accessories only. Velleman nv cannot be held responsible in the event
of damage or injury resulting from (incorrect) use of this device. For more info concerning this
product and the latest version of this manual, please visit our website www.velleman.eu. The
information in this manual is subject to change without prior notice.
© COPYRIGHT NOTICE
The copyright to this manual is owned by Velleman nv. All worldwide rights reserved. No part of this
manual may be copied, reproduced, translated or reduced to any electronic medium or otherwise without the
prior written consent of the copyright holder.
V. 01 – 10/06/2016
LABPS6015SM
8 regulated voltage indication
9 regulated current indication
10 output positive terminal 15 A max.
11 output negative terminal 15 A max.
12 fuse
13 grounding terminal
4 ©Velleman nv