LGB Ge 6/6 I Serie Mode D'emploi page 10

SERVICE
Lubrication
Oil each of the axle bearings now and then with a drop of Märklin oil (7149).
Changing Light Bulbs
Headlights: Carefully lift the glass from the lantern. Pull the light bulb out of the
socket with a pair of tweezers. Insert new light bulb. Put the model back together.
Interior Lighting: Pull the light bulb out of the socket with a pair of tweezers. Insert
new light bulb.
Changing Traction Tires
Remove the old traction tire with a small flat blade screwdriver: Lift the old traction
tire out of the groove in the driving wheel. Carefully push the new traction tire over
the wheel and insert it into the groove of the wheel. Check to make sure that the
traction tire is properly seated.
Controllable Functions
Lighting 1
Sound effect: whistle blast
Sound effect: Squealing brakes off
3
Front pantograph raise/lower
Sound: station announcements, sequence for Chur - St. Moritz
Sound effect: Conductor whistle
Sound effect: Operating sounds
3
Rear pantograph raise/lower
Sound on/off
ABV, off
Engineer's cab lighting
Rear headlights off
Headlights in the front off
Sound effect: Blower
Sound: vacuum pump
Sound effect: sanding
Sound effect: Short whistle blast
Sound effect: Announcement
Sound effect: Announcement
Sound effect: Letting off air
Sound effect: Rail joints
Sound effect: Coupling together (buffer to buffer)
1
active in analog operation
2
with random sounds
3
switched together: Changes with direction
10
1,2
LV + LR
1 Sound 1
2 BS
3
4 Sound 5
5 Sound 4
6 FS
7
8
9
10 AUX 1+2
11 AUX 3
12 AUX 4
13 Sound 9
14 Sound 11
15 Sound 14
16 Sound 2
17 Sound 6
18 Sound 20
19 Sound 19
20 Sound 17
21 Sound 18