NEC MultiSync LCD1860NX Mode D'emploi page 8

Quick Start
This LCD monitor is designed for use with a flexible arm.
Please use the attached screws (4pcs) as shown in the picture when installing.
To meet fhe safety requirements, the monitor must be mounted to an arm which
guaranties the necessary stability under consideration of the weight of the
monitor.
The LCD monitor shall only be used with an approved arm (e.g. GS mark).
Specifications
(MAX depth: 10mm)
LCD1860NXManual102802.p65
–continued
100mm
If using other screws, check depth of holes.
Weight of LCD assembly: 6.2kg (MAX)
6
6
Thickness of Bracket(Arm)
2.0~3.2mm
Tighten all screws.
100mm
10/28/02, 5:15 PM