BabyGo Side Crib Instructions De Montage page 21

Instruction for fixing to parents' bed
1. Open the side of the crib with the mesh window using the side zips.
Open them completely.
2. Release the studs from the tubing (fig 13) and partially remove the tubes.
Once this operation has been performed on both sides, lower the crib side
panel and fit it to the base of the crib main body using press studs (fig 14).
WARNING! Use the crib with the tube lowered in co-sleeping mode only.
fig. 13
fig. 12
fig. 14
Side Crib
21