Merit Fitness 715T PLUS Manuel Du Propriétaire page 16

ASSEMBLY STEp 4
HARdWARE bAG 4 CONTENTS :
END CAPS
SCREWS (H)
MAIN FRAME
16
SCREW (H)
12 mm
Qty: 4
Open hardware bag 4.
A
NOTE: lock latch must be securely engaged
before proceeding with assembly. (See folding
instructions in TREADMILL gUIDE.)
Attach the right end cap using 2 screws
B
(h). Repeat on the other side.
Connect power cord to a power outlet. The
C
ON/OFF switch is located next to the power
cord. Flip this switch to the 'ON' position. You
will hear a beep and the console will turn on.
Before the first use, lubricate the treadmill
D
deck by following the instructions in the
MAINTENANCE section in the TREADMILL
gUIDE.
YOU ARE FINISHED!