!
Given the choices made in this unique lighting concept, there are a few instructions regarding the maintenance.
•
Please do not remove the protect lm before installing to avoid scraping or dirtying the optical part.
•
Prevent water from entering on or in the luminaire at installation and during use of the luminaire
•
During installation or maintaining the luminaire please use gloves to avoid spots on the cover.
•
Do not clean with a dry cloth as it will cause the product to attract dust. Dirty spots can be removed:
Only dust: use a damped cloth (no dripping water), preferably anti-static.
Fingerprints etc: use a damped cloth (no dripping water) with a cleaner
approriate for polycarbonate/PMMA plastics
•
Do not touch electronic components as they are ESD sensitive.
•
Do not stare into LED beam.
•
Luminaire should not be used for illumination during building activities
due to dust accumulation inside the luminaire.
!
To get an overview of all spare parts for a luminaire,
please refer to detailed instruc�ons in the service manual
available via the Signify Service tag apps (Android and iOS).
The light source of this luminaire is not
replaceable; when the light source reaches its end
of life the whole luminaire shall be replaced
Scan me!
Register me!
+
7/20
LASER RADIATION
AVOID DIRECT EYE EXPOSURE
CLASS 2M LASER PRODUCT
2
/10S 443.533.552nm
210J/M
wg PN-EN 60825-1 -2005