Novonova SY-1025 Manuel D'instruction page 30

Location is in the middle of the lower surface of the running belt. When add lubricant, please
inject to the center of running board, then put down the belt, pressing the hole by hands, rotat-
ing the belt to apply evenly.
Please be assured that the box of this product is recycling, the rest of the packaging can be trashed.
In case the product contains batteries, do not trash directly.
This device concerned has been manufactured under an EU
Declaration of Conformity and compliance with all relevant EU
Directives, including EN ISO 20957-1; EN 957-6 .
USE THE TREADMILL LUBRICANT
Importer:
SAS ISE
1 Chemin d'Armancourt
60200 Compiègne France
TEL : +33 3 44 76 21 66
PORT : +33 6 32 91 85 26
contact@isefit.com
www.isefit.com
14
EN