Mounting - Cormach LIGRO Manuel D'utilisation Et D'entretien

- Lift the second bead manually over the
head (Fig. 29), then turn the turntable
clockwise until the tyre has been com-
pletely demounted from the rim.
- Tilt the column backwards.
NOTE: When working with wide wheels
(13" - 14"), the HELP roller (on request)
must be used to lift the second bead
onto the mounting/demounting tool (Fig.
30).
Operator's manual Ligro - Ligro GT
WARNING
Always check that the tyre size is compa-
tible with the rim size before mounting.
- Ensure that the tyre is in good condi-
28 tion and undamaged, then lubricate
the beads (see chapter relative to soft-
walled tyres).
- Place the tyre over the wheel and tilt the
tower forward.
- Mount the lower bead, proceeding as
described for soft-walled tyres.
Proceed as follows to mount the upper
bead:
- Use the HELP roller (on request)to cre-
ate a large enough gap to first insert the
edge guard and then fit the clamp onto
29
the edge guard itself (see Fig. 31).
31
30

Mounting

UK
53