Steba WP 2 Mode D'emploi page 10

Before using for the first time
∙ Remove all packaging materials.
∙ Clean the device with a damp cloth.
∙ Take care to prevent water from running into the appliance.
∙ When your appliance is new you may notice a slight smoking or
ordor. This is normal with any heating appliances and will not
recur. This does not affect the safety or your appliance.
Cleaning
∙ Always switch off, unplug and allow to cool down before clea-
ning.
∙ After cooling the device can be cleaned with a paper towel.
There is no need to disassemble the appliance for cleaning.
∙ Never immerse appliance in water or any liquid. Do not place in
dishwasher.
Operation
The appliance is for warming of foods and dishes.
∙ Plug the cord in a 220-240 volt AC outlet only.
∙ Turn the temperature knob to your desired temperature. NOTE: Always preheat for
7 minutes.
∙ After use, turn the Temperature knob to the "MIN" position, un-plug the device.
∙ Only use the provided cable to connect the plates.
Adjustment
max 120°C, heating up time 10 minutes
min 60°C, heating up time 4 minutes
If you need a larger surface please connect the second part with the basic part
Important: Don´t use the second part with an separate cable!
Guarantee
The guarantee conditions for this appliance are as defined in our „Instructions for
use" in German.
10