Publicité
Les langues disponibles
Les langues disponibles
USING THE APPLIANCE
First use: run the appliance to eliminate the "new smell" and any oil residue from the manufacturing
process for at least 10/15 minutes. During this operation, ventilate the room well to eliminate the
"new smell" that is given off by the appliance.
The heating fan can be adjusted using the following:
-Selector. By turning the relative knob clockwise, you can select these functions:
0= off,
only ventilation.
= very hot air (2000W) and Right-left oscillation.
-Room thermostat. It adjusts the appliance's functions according to the temperature, continuously
until reaching the set temperature, then at intervals to keep it constant. By turning the relative knob
completely anti-clockwise the heating fan remains off (pos."-"), when turned completely clockwise it
is set on the maximum temperature (pos."+"), in intermediate positions the surrounding temperature
is lower.
- Indicator light: comes on according to the thermostat's operation. It is on when the appliance is
running.
-Equipped with a safety device, which turns off the appliance in the event of overheating. To start it
again, remove the plug from the mains and allow it to cool (approximately 10/20 minutes).
Thereafter, plug it back in and turn it on once again.
- Anti-tipping switch which allows the heating fan to function only when it is positioned correctly
(when it is put in place, you will hear a "click") but it stops the appliance if it tips.
To use the heating fan, follow these steps:
1. Insert the plug in the power socket.
2. Turn the thermostat knob clockwise to the temperature required.
3. Switch on the appliance by turning the selector knob to the position of the required function.
4. The light turns on and turns off when the appliance reaches the requested temperature; if the
thermostat is set at the maximum level, the appliance works continuously.
5. To switch off the appliance, switch off the resistance completely, let only the fan run for about 3
minutes (pos.
turning the knob to "0" (off). Then always remove the plug from the power socket.
If the appliance is not being used for long periods of time, remove the plug from the plug point.
= hot air (1000W).
) to cool the resistance (this way it will last longer), then switch off the fan by
= very hot air (2000W).
12
Publicité
