Operating Location; Handling And Use - VOLTCRAFT 4500ADVANCED Mode D'emploi

• Handle the product with care; it can be damaged by impacts, blows, or accidental
falls, even from a low height.
• In commercial institutions, the accident prevention regulations of the Employer's
Liability Insurance Association for Electrical Systems and Operating Facilities are
to be observed!
• If you have any questions that are not answered in these operating instructions,
please contact our technical department or another specialist.
b) Operating location
• The product may be used in dry, enclosed indoor areas only; it must not get
damp or wet! Never place the product in direct vicinity of a bathroom, shower,
bathtub or the like. Lethal hazard due to electric shock!
• The product is not a toy and does not belong in the hands of children. Position
the product so it is out of the reach of children.
• The product must not be exposed to extreme temperatures, direct sunlight or
strong vibrations.
• Do not operate the device in environments where there are high levels of dust,
flammable gases, vapours or solvents. There is a danger of fire and explosion!
• Never use the product in a vehicle.
c) Handling and Use
• Also observe the safety and operating instructions of any other devices that are
connected to this product.
• Never pull out a mains plug by pulling on its cable when disconnecting it from the
front socket of the product. Always pull the plug out of the front socket by gripping
the area provided for this purpose on its sides.
• Never overload the product. Observe the connected load in the chapter "Techni-
cal data".
• Do not connect several measuring devices with each other.
• Do not operate while it is covered! At higher connected loads, the product
becomes warm, which can lead to overheating and potentially a fire if covered!
29