Axis PEAKnx 2N IP Verso Notice Abrégée page 24

3 Setting up the YOUVI door station module
2. Go to „Install Door intercom".
3. Under More > License, you can view the remaining days of your trial license.
4. For unlimited use, please purchase the module in the PEAKnx Shop.
5. Select the Door intercom icon on the Dashboard page to open the settings.
6. Add a new door station via the „+" symbol.
7. Intercom name: This name appears as a label in the upper left corner of the widget.
8. Username: Enter the name that you have assigned in your Fritzbox (your SIP server) for
the touch panel with YOUVI, e.g. "Control 12". You can also find your credentials under fritz.
box > Telephony Devices if you edit the created PEAKnx Panel (IP Phone) and go to the tab
"Login data."
9. Password: Enter the password associated with the user name here.
10. SIP Server IP Address: Enter the IP address of your SIP server (fritzbox) here.
11. Camera Stream: Enter the link of the camera stream from your door station here.
− This is composed of the IP address of the door station and the ending
"/enu/camera{resolution}.jpg", for example:
http://192.168.188.30/enu/camera1280x960.jpg
− An RTSP stream is entered in the following format:
− rtsp://192.168.188.30:554/
12. Stream Type: Depending on the license, select „JPEG" or „RTSP".
13. Stream Refresh Interval in ms (for JPEG streams): Enter „500" ms to get 2 frames per
second.
14. Unlock method: Select the mechanism by which your door opener function is connected,
e.g. DTMF.
− DTMF Code: Enter the DTMF opening code, that you defined in the "Switches" tab on
the 2N configuration website. For confirmation, the code must be terminated with a "*"
symbol, e.g. "00*".
− Http Request: Enter the http command to open the door.
− Telegram: Specify the group address for opening the door.
24