Axis PEAKnx 2N IP Verso Notice Abrégée page 19

2 Setting up the 2N IP Verso door intercom
5. Under Services > Phone > SIP 1 you will find the SIP settings.
6. Under "Phone Number (ID)", enter the name for the door intercom system that you have
assigned to the system in the Fritzbox.
7. Under "Domain", enter the IP address of the Fritzbox (registrar).
− You can also find your login data and registrar (Registration server) under fritz.box >
Telephony devices, if you edit the created door intercom system and switch to the "Login
data" tab.
8. Place a check mark at "Use Authentication ID".
9. Under "Authentication ID" and "Password", enter the authentication name and the password
which you have assigned for the 2N door station in the Fritzbox.
10. Under "Proxy Address" enter the IP address of the Fritzbox (registrar).
11. For the "Proxy Port" the 5060 is assigned by default in the Fritzbox.
12. Place a checkmark at "Registration enabled".
13. Enter again the IP address and port of the Fritzbox under "Registrar Address" and "Registrar
Port".
14. Click on "Save".
15. The status should now show "Registered".
19