Axis PEAKnx 2N IP Verso Notice Abrégée page 23

3 Setting up the YOUVI door station module
3 Setting up the YOUVI door station module
Via the door station module it is possible to integrate SIP intercom systems into the visualiza-
tion. To do this, proceed as follows:
1. Open the YOUVI Configuration Dashboard page via the desktop shortcut or the green
house in the taskbar.
− You can also reach the configuration page on your browser, as long as you are in the
same network as the PEAKnx touch panel. To do this, enter the following URL in your
browser:
− http://x.x.x.x:31228 or http://x.x.x.x:31226, Where x.x.x.x must be replaced by the local IP
address of your PEAKnx touch panel. This is shown to you in the server overview:
23