Publicité
Les langues disponibles
Les langues disponibles
2 Setting up the 2N IP Verso door intercom
2 Setting up the 2N IP Verso door intercom
1.
Connect the 2N device to a PoE-enabled switch on your network.
2.
To be able to set up the IP Verso, you must enter its IP address into your browser. It is also
specified in the instructions of the door station, e.g.: 192.168.188.30.
−
At fritz.box under Overview > Home network, the active clients/devices are displayed.
Here you will also find the IP address of the door intercom. Enter it in the browser to reach
the configuration page of the door station.
3.
The default user name is: "Admin", the password is "2n".
4.
You can set the languages at the top right corner of the page.
18
Publicité
