HP Color LaserJet Enterprise MFP X677 Guide D'installation page 6

7
Connect the phone cord for fax. A country/region specific adapter for the RJ11 telephone cord may be required to connect to the telephone jack.
EN
NOTE: The cables are not included with the printer.
Branchez le cordon téléphonique au télécopieur. Un adaptateur spécifique à votre pays/région pour le cordon de téléphone RJ11 peut être requis
FR
pour le branchement à la prise téléphonique.
REMARQUE : Les câbles ne sont pas fournis avec l'imprimante.
Conecte el cable telefónico para fax. Es posible que sea necesario usar un adaptador específico para el país/la región para conectar el cable
ES
telefónico RJ11 a la toma de teléfono.
NOTA: los cables no se incluyen con la impresora.
Conecte o cabo telefônico para fax. Um adaptador específico do país/região pode ser necessário para conectar o cabo telefônico RJ-11
PT
à tomada telefônica.
NOTA: Os cabos não são fornecidos com a impressora.
8
8.1
8.1 Connect the power cable between the printer and a grounded AC outlet.
EN
control panel, set the language, the date/time format, and the time zone.
NOTE: For advanced configuration of network-connected printers, enter the printer IP address in the address bar of a web browser after software
installation is complete. To find the IP address, select the Information
CAUTION: Make sure your power source is adequate for the printer voltage rating. The voltage rating is on the printer label. The printer uses either
100-127 Vac or 220-240 Vac and 50/60 Hz. To prevent damage to the printer, use only the power cable that is provided with the printer.
8.2 Turn on the printer, and then wait for it to initialize.
button, and then select the Network
6
8.3
8.2
8.3 On the
icon.