QiCYCLE N2 Manuel D'utilisation page 21

To Recycling Organizations
Remove the battery
1. Operate the power tool until the battery is completely
discharged(empty).
2. Unscrew the screws on the enclosure and remove the enclosure.
3. Disconnect the connectors on the battery one at a time to prevent a
short circuit.
4. Remove the battery.
5. Isolate the poles.
Even with complete discharge battery still has a residual capacity in the
battery included, which can be released in the event of a short circuit.
EC DECLARATION OF CONFORMITY
Business name of the manufacturer
iRiding (Shenzhen) Technology Co., Ltd.
Full address of the manufacturer
Room 1708, No.1 Yuexing Forth Road, Nanshan District, Shenzhen,
Guangdong Province, 518000, P. R. China.
name and address of the person (established in the Community)
compiled the technical file
Company: Prolinx GmbH
Contact Person: Jie Xue
Address: Brehmstr. 56, 40239 Duesseldorf, Germany
Country: Germany
We herewith declare that the machine
Product name: QiCYCLE Portable Electric Air Compressor N2
Commercial name: QiCYCLE Portable Electric Air Compressor N2
function: Intended to inflate some motorcycles, bicycles, cars, and balls
Model/s: QJCQBN2
Type: Battery powered
serial number: N2CEN/XXXXXXXXXXXXXX (the fourteen X's represent
the natural number starting from 00000000001)
fulfills all the relevant provisions of directives:
2006/42/EC, 2014/30/EU
and tested in accordance with below standards
EN 62841-1:2015; EN 1012-1:2010; EN ISO 12100:2010;
EN 55014-1:2017+A11,EN 55014-2:2015
EN IEC 55015:2019+A11,EN 61547:2009
Place and date of the declaration: July, 2021, Shenzhen China
Signature of the person:
21