QiCYCLE N2 Manuel D'utilisation page 10

2. Turning on / off
Turning off:
Insert the high-pressure air hose back into the air compressor to turn it off.
To turn it off, press and hold the start/stop button while the air compressor is
turned on.
3. Connecting the High-pressure Air Hose and Nozzle
Schrader Valve
Valve Type
Presta Valve Adapter
Valve Type
10
Turning on:
Remove the high-pressure air hose from
its compartment, then the air compressor
will automatically turn on. If the air
compressor is not used for 3 minutes, it will
automatically turn off. If the air compressor
automatically turns off while the high-
pressure air hose is pulled out, press and
hold the start/stop button to turn the air
compressor on again.
Tires on cars, motorcycles, e-bikes, and
most mountain bikes use a Schrader
valve.
To inflate: Connect the Schrader valve
adapter on the high-pressure air hose
to the Schrader valve to start inflating.
To deflate: Use an appropriate tool (for
example, a 4 mm hex key) to press the
valve stem to release the air.
Road bicycles and certain mountain
bikes require the included Presta valve
adapter to be used.
To inflate: 1. Connect the Presta valve
adapter to the Schrader valve adapter
on the high-pressure air hose.
2. Unscrew the tire's Presta valve.
3. Connect the Presta valve to the
adapter to start inflating.
To deflate: Unscrew the Presta valve
and press the valve stem down to
release air.