Bose CineMate 520 Notice D'utilisation page 26

Getting System Information from the Display
Understandin messages on the display
The display on the front of the console allows you to access the System menu and
shows system information and icons.
Using the System menu
Use the System menu to adjust audio levels, turn on/off features (such as
AUTO OFF), change the language, set the coaxial, analog and optical inputs for a
particular source, run ADAPTiQ ®, pair your Acoustimass ® module with the console
or factory reset the system.
1. Press on the remote.
2. Press A and Y to scroll through the System menu.
3. Press _ and _ to adjust the settings.
4. Press _.
1 AUDIO COMP
Off: (Default) No change to audio track.
Enhance dialogue: Increases the level of dialogue and
sound effects at low volume settings while
providing full audio impact at high volume settings.
Smart volume: Reduces the range of volume levels in a
movie soundtrack so the difference between extremely
loud outbursts and soft sounds is less noticeable.
2 AUDIO/VIDEO SYNC Adjusts the audio delay to synchronize audio and video.
3 HDMI=CEC On: (Default) Enables CEC (see page 21).
Off: Disables CEC.
4 AUTO OFF Enable: (Default) The system powers off after sixteen
minutes of inactivity (no sound coming from the system).
Disable: The system will not automatically power off.
5 SiDE AUX
Audio in: (Default) Sets the _4 connector for an auxiliary
source.
Headphones: Sets the ,Q connector as a headphones
input. _)
Note: If set to Headphones input and a cable is
connected, the speakers are muted.
Disconnect your headphones when not in use.
6 BASS LEVEL Adjusts bass level.
7TREBLE LEVEL Adjusts treble level.
8 CENTER LEVEL Increases or decreases the level of dialogue for movies
and TV.
26 - English