Télécharger Imprimer la page

Powerworks BLF341 Manuel D'opérateur page 9

Publicité

Les langues disponibles

Les langues disponibles

13.2 STORE THE MACHINE
Clean the machine before storage.
Make sure that the motor is not hot when you store
the machine.
Make sure that the machine does not have loose
or damaged parts. If it is necessary, do these steps/
instructions:
Replace the damaged parts.
Tighten the bolts.
Speak to a person of an approved service
center.
Store the machine in a dry area.
Make sure that children cannot come near the
machine.
14
TROUBLESHOOTING
PROBLEM
POSSIBLE
CAUSE
The motor does
not start when
The unit is dis-
you pull the trig-
connected.
ger.
The power switch
is defective.
The machine
The motor is de-
does not start.
fective.
The PCB board is
defective.
The air does not
flow through the
The air inlet or
tube when you
tube outlet has a
start the ma-
blockage.
chine.
Cruise control
The screw is
lever does not
loose.
work.
15
TECHNICAL DATA
Voltage
40 V
Air volume
390 CFM
Air speed
110 MPH (177 Km/h)
Weight (without
4.45 lbs. (2.02 kg)
battery and
charger)
Battery model
29462, 29472, 2901319, BAF722,
BAF704 and other BAF series
Charger model
29482 and other CAF series
English
The recommended ambient temperature range:
Item
Blower storage tempera-
ture range
Blower operation tempera-
ture range
Battery charging tempera-
ture range
Charger operation temper-
ature range
Battery storage tempera-
ture range
Battery discharging tem-
perature range
16
SOLUTION
Connect to an
outlet or an ex-
tension cable.
Replace the de-
fective parts by
Greenworks hereby warranties this product, to the
an approved
original purchaser with proof of purchase, for a period
service center.
of three (3) years against defects in materials, parts
or workmanship. Greenworks, at its own discretion, will
repair or replace any and all parts found to be defective,
through normal use, free of charge to the customer.
Remove the
This warranty is valid only for units which have been
blockage.
used for personal use, that have not been purchased
or rented for industrial/commercial use, and that have
been maintained in accordance with the instructions
in the owner's manual supplied with the product when
Tighten the
new.
screw with a
screwdriver.
ITEMS NOT COVERED BY WARRANTY:
1. Any part that has become inoperative due to
2. The unit, if it has not been operated and/or
3. Normal wear;
4. Routine maintenance items such as lubricants,
5. Normal deterioration of the exterior finish due to use
9
Temperature
32°F (0°C) - 113°F (45°C)
32°F (0°C) - 113°F (45°C)
39°F (4°C) - 104°F (40°C)
39°F (4°C) - 104°F (40°C)
32°F (0°C) - 113°F (45°C)
32°F (0°C) - 113°F (45°C)
LIMITED WARRANTY
3
LIMITED WARRANTY
GARANTIE LIMITÉE
GARANTÍA
LIMITADA
misuse, commercial use, abuse, neglect, accident,
improper maintenance, or alteration; or
maintained in accordance with the owner's manual;
or
blade sharpening;
or exposure.
YEAR
ANS
AÑOS
EN

Publicité

loading

Ce manuel est également adapté pour:

2400802