Publicité
Les langues disponibles
Les langues disponibles
EN
11.1 START THE MACHINE
8
1. Pull the trigger (1) to start the machine.
2. Pull the trigger fully to increase the speed.
3. Release the trigger to decrease the speed.
11.2 STOP THE MACHINE
1. Release the trigger to stop the machine.
Wait until the motor stops after you stop the machine.
11.3 CRUISE CONTROL LEVER
8
1. Pull the cruise control lever (8) clockwise to increase
the speed. This will lock the speed at the desired
setting.
2. Push the cruise control lever (8) counter clockwise
to decrease the speed.
If you decrease the speed all the way, the unit will stop
and it is necessary to start the machine again.
1
NOTE
1
NOTE
English
11.4 OPERATION TIPS
•
Blow around the outer edge of the unwanted
materials to prevent the unwanted materials from
scattering.
•
Use rakes and brooms to clear the unwanted
material before you blow.
•
Make the surfaces wet before you clear the
unwanted material in dusty conditions.
•
Look out for children, pets, open windows, and
cleaned cars during operation.
•
Clean the machine.
•
Discard the unwanted material when you complete
work.
12
MAINTENANCE
Do not let brake fluids, gasoline, petroleum-based
materials touch the plastic parts. Chemicals can
cause damage to the plastic, and make the plastic
unserviceable.
Do not use strong solvents or detergents on the plastic
housing or components.
Remove the battery pack from the machine before
maintenance.
12.1 CLEAN THE MACHINE
The machine must be dry. Humidity can cause risks of
electrical shocks.
•
Clear the unwanted material out of the air vent with
a vacuum cleaner.
•
Do not spray the air vent or put the air vent in
solvents.
•
Clean the housing and the plastic components with
a moist and soft cloth.
13
TRANSPORTATION AND
STORAGE
Remove the battery pack from the machine before
transportation and storage.
13.1 MOVE THE MACHINE
•
Only hold the machine with the handgrip.
8
CAUTION
CAUTION
WARNING
CAUTION
WARNING
Publicité
