XZENT X-227 Manuel De L'utilisateur page 4

MAIN MENU
A
1
B
MAIN MENU operation buttons and display
A Time and date.
B Page indicator.
1. Source Icon Press to open selected source.
To browse the different source icons, swipe left or right. Alternatively you can press the arrow keys
to browse the different pages.
To return to this screen you can press the HOME front sensor key or the return arrow button in top
left corner of every source.
1 2
6 7
6
3 4 5
8 9 10
11 12
STEERING WHEEL CONTROL
The XZENT device is pre-confi gured to work with an IR-Stalk-Interface which is NOT included in the set.
To use the IR-Stalk interface a XZENT compatible IR-Stalk-Adapter of your Vehicle type needs to be
purchased and installed. Alternativly an existing steering wheel control can be connected to the Key1/
Key2 inputs. For the Fiat Ducato X290 this set includes a red miniISO-Connector which can be plug and
play connected to Key1/Key2 inputs. On default the Fiat Ducato X290 steering wheel control functions
are assigned but you can re-assign or change this in the Analoge-Key-Mode (see next chapter).
Non standard is the CAM function which is set to the left bottom SWC key – this is XZENT specifi c.
Other vehicles than Fiat Ducato X290 with resistive steering wheel control buttons can also be connec-
ted to Key1/Key2 inputs – but need reassign or change the default values before fi rst use of the SWC.
Possible button functions and general buttons
1. Mute short press to mute the XZENT audio output. Press again to undo the mute function.
2. Vol- short press to reduce the volume of the current active audio channel (media vol,
voice, etc.).
3. Vol+ short press to increase the volume of the current active audio channel (media vol,
voice, etc.).
4. Skip back short press to while media source DAB, USB, FM, etc. is active to do the same
touchscreen button operation.
5. Skip next short press to while media source DAB, USB, FM, etc. is active to do the same
touchscreen button operation.
6. Pickup short press to accept incoming call.
7. HangUp short press to end ongoing call.
8. Voice short press to start voice recognition (in use with CarPlay).
9. FAV short press to execute assigned FAV function from device settings (see chapter
device settings).
10. CAM short press to open camera source. Press again to close.
11. Change short press to remove current steering wheel button assigments and reassign them
(see next Chapter).
12. Default short press to load Fiat Ducato X290 default values.
SWC (re)Assignment
In case your XZENT device is connected via Key1/Key2 Inputs to your resistive steering wheel control
buttons you can directly use the Fiat Ducato X290 default functions or reassign them. For other vehicles
than Fiat Ducato X290 you need to initially assign them before fi rst use of the analoge/resistive steering
wheel control buttons.
1. To change or re-assign the functions press the „Change"-Button (11).
2. The system now highlights the next non-assigned function to be assigned. However you can press a
different function on the touch screen to learn the functions in your preferred sequence.
3. To assign the marked functions to a steering wheel control button – press the button on the steering
wheel control while the functions is highlighted. On success the function is displayed in white and the
system will markt he next free unasigned function for you automatically. Repeat this step until you
have assigned all needed functions to your remaining steering wheel control buttons.
4. To safe the changes leave the screen by tapping to the upper left back button.
Note:
CAN based steering wheel controls require a compatible XZENT IR-Stalk adapter for your vehicle type
which is sold separately. The XZENT IR-Stalk interface needs to be connected to correctly including the
IR-Input of your XZENT device.
Analogue / resistive steering wheel controls can be connected via Key1/Key2 inputs. For Fiat Ducato
X290 a plug and play red miniISO connector is included and can be directly connected if the Fiat Ducato
X290 is equipped with a steering wheel control. Other vehicle types with analogue /resistive steering
wheel control needs to be correctly connected to Key1/Key2 inputs and do an initial assignment fi rst.
(OE MODE, IR-STALK-INTERFACE)
7