Porter Cable PCE606 Mode D'emploi page 6

1
F
E
COMPONENTS
A.) On/Off switch
B.) Variable speed dial
C.) 10 foot cord
WARNING:
assembly, adjustments or changing accessories. Such preventive safety measures
reduce the risk of starting the tool accidentally.
WARNING:
accessories at any time. Do not touch work piece or blade immediately after operating
the tool. They can become very hot. Handle carefully. Always allow accessories and
work piece to cool before handling.
CAUTION:
accessories and is not compatible with other Porter-Cable accessories.
INSTALLING/REMOVING
ACCESSORIES
The tool features an exclusive Tool Free System
for faster accessory changes and adjustments
without the need for wrenches or hex keys like
other oscillating tool systems.
• Grasp the tool and squeeze the Tool-Free
System's accessory clamping lever as shown in
figure 2.
• Clean any residual debris from the tool shaft and
the accessory holder.
D
Disconnect the plug from the power source before making any
Risk of lacerations or burns. Do not touch the sharp edges of
This multi-tool is compatible only with DeWalt
A
D.) Tool-Free accessory clamp
E.) Depth/Cut guide*
F.) Depth/Cut adjustment knob*
* Included with PCE605K only.
ASSEMBLY
2
6
B
C
Universal Fitment
®
TM