Hilti NURON NUN 54-22 Mode D'emploi page 14

4 Technical data
Rated voltage
Weight without battery
Crimping / pressing time
Max. crimping / pressing force
Max. cutting capacity HAWK
Max. cutting capacity (NCT J ACSR cutting jaw)
max. cutting capacity (outside diameter)
(NCT J CUAL cutting jaw)
Max. permissible crimping capacity
Storage temperature
Ambient temperature for operation
4.1 Battery
Battery operating voltage
Weight, battery
Ambient temperature for operation
Storage temperature
Battery charging starting temperature
5 Preparations at the workplace
WARNING
Risk of injury by inadvertent starting!
▶ Before inserting the battery, make sure that the product is switched off.
▶ Remove the battery before making any adjustments to the power tool or before changing accessories.
WARNING
Risk of injury by incorrectly positioned crimping/cutting dies! Incorrectly positioned crimping/cutting
dies can fly out like projectiles and cause injuries.
▶ Before and during the crimping/cutting operation, make sure that the crimping/cutting dies are correctly
positioned.
8 English
EHS Guy Wire
Steel-reinforced Al ca-
ble (ACSR)
Cu/Al cable
Cu cable
Al cable
Cu cable
Al cable
21.6 V
See the end of these operating
instructions
1 ℉ ... 140 ℉
(−17 ℃ ... 60 ℃)
−4 ℉ ... 104 ℉
(−20 ℃ ... 40 ℃)
14 ℉ ... 113 ℉
(−10 ℃ ... 45 ℃)
2321737
*2321737*
21.6 V
3.7 lb
(1.7 kg)
≈ 4 s
11,900 lb
f
(53 kN)
477 MCM
9/32 in
(7.1 mm)
13/16 in
(20.6 mm)
15/16 in
(23.8 mm)
1 1/4 in
(31.8 mm)
1 19/64 in
(32.9 mm)
600 MCM
300 MCM
−4 ℉ ... 158 ℉
(−20 ℃ ... 70 ℃)
1 ℉ ... 140 ℉
(−17 ℃ ... 60 ℃)