Publicité
Les langues disponibles
Les langues disponibles
Table 2: Button Press Duration
Action
Press
Long press
2.1.1
Assignable Radio Functions
You can assign a list of radio functions to the programmable buttons.
Table 3: Types of Programmable Functions
Function
All Alert Tones On/Off
Battery Indicator
High/Low Power
Monitor
Nuisance Delete
One Touch Access
Repeater/Talkaround
Scan On/Off
Tight/Normal Squelch
2.2
LED Indications
The LED Indicator shows the operational status of your radio. A qualified technician can permanently
disable the LED indication by preprogramming it.
Table 4: LED Indications
Indication
Solid Red
Blinking Red
Solid Yellow
Solid Green
Blinking Green
Description
Press and release.
Press and hold for 4 seconds or less depending on the settings
through the Customer Programming Software (CPS).
Description
Allows you to toggle all tones and alerts on or off.
Allows you to indicate battery strength by using the LED Indicator.
Allows you to toggle transmit power level between high and low.
Allows you to monitor a channel.
Allows you to temporarily remove an unwanted channel, except for
the Selected Channel, from the scan list. The Selected Channel refers
to the selected zone or channel combination of you from which scan is
initiated.
Allows you to directly initiate a predefined Private Call, Group Call,
Call Alert, or Home Revert.
Allows you to toggle between using a repeater and communicating
directly with another radio.
Allows you to toggle scan on or off.
Allows you to toggle squelch level between tight and normal.
Status
The radio is transmitting.
The battery capacity is low.
The radio is scanning for activity.
The radio is receiving transmission.
The radio is scanning for activity.
MN006027A01-AC
Chapter 2 : Radio Overview
9
Publicité
