3.6
Removing the Universal Connector Cover
Procedure:
Remove the universal connector cover or dust cover by pulling the cover out.
Postrequisites: Replace the dust cover when the universal connector is not in use.
3.7
Turning the Radio On
Procedure:
Turn the On/Off/Volume knob clockwise until a click sounds.
If your radio is turned on, your radio shows the following indications:
•
A tone sounds.
NOTE: If the Tones/Alerts function is disabled, no tone sounds.
•
The orange LED blinks, followed by the green LED.
NOTE:
If your radio fails to turn on although your battery is charged and properly attached, contact your
dealer for assistance.
3.8
Turning the Radio Off
Procedure:
Turn the On/Off/Volume knob counterclockwise until a click sounds.
MN006027A01-AC
Chapter 3 : Getting Started
15