Hansgrohe Metris E 31087 1 Serie Instructions De Montage / Mode D'emploi / Garantie page 4

1
2
3
4
Installation
Install the drain pull rod.
Place the faucet, escutcheon, and sealing ring on
the mounting surface.
Install the fiber washer, friction washer, and
mounting nut.
Tighten the mounting nut by hand.
Tighten the tensioning screws.
Connect the hoses to the stops.
Install the drain.
Turn on the water and check all connections for
leaks.
16 mm
9 mm
English
Do not allow the supply hoses
to twist.
Twisted supply hoses may
become loosened from the
faucet, which may cause water
damage.