Publicité
Les langues disponibles
Les langues disponibles
Options
TURBOZONE
TM
option
Blasts into every corner to eliminate
the need for soaking and scrubbing
of dirty, baked-on dishes. For your
toughest items, use the
TURBOZONE
T M
option with the Pots
Pans cycle. See loading information.
Can be
selected with
SmartWash
®
Pots Pans
Normal
Wash
What it does
Directs cleaning power
of the dishwasher to
the TURBOZONE
T M
area
during certain times in
the wash cycle.
Added time to cycle
Typical
Max
20
30
Added
Water t
Gallons
(Liters)
Hi Temp
Raises the main wash temperature
to improve cleaning. When used
with the Normal Wash cycle this will
provide a little extra tough cleaning
capability, but not as much as the
Pots Pans cycle.
SmartWash ®
Pots Pans
Normal Wash
Raises the main wash
temperature from 105°F
(41°C) to 145°F (63°C).
10
20
Steam Sanitize
This high temperature steam option
sanitizes your dishes and glassware
in accordance with National
Sanitation Foundation (NSF)/ANSI
Standard 184 for Residential
Dishwashers. Certified residential
dishwashers are not intended for
licensed food establishments.
The
green sanitized light indicates that
the Steam Sanitize option was
successfully
completed.
SmartWash ®
Pots Pans
Normal Wash
Increases the main
wash temperature from
105°F (41°C) to 120°F
(49°C) and the final
rinse from 140°F (60°C)
to 155°F (68°C) and
provides steam.
29
39
Heated Dry
Turns the heat element on after the
wash cycle is completed.
Use rinse
aid with or without the Heated Dry
option for best drying results.
Plastic items are less likely to
deform when loaded in the top dish
rack.
Available with
any cycle
except
Quick Rinse
Turns the heat element
on at the end of the
wash cycle.
26
26
0
tThe maximum additional water used for any combination
of options is 2.1 gal. (7.9 L).
Delay Hours
Use this option to run your dishwasher during off-peak hours. Local utility providers recommend using energy during
off-peak hours when possible. Be sure to close the door and press START/RESUME after adding items.
To delay the start
1. Select a wash cycle and options.
2. Press the delay button to choose the number of hours to be delayed.
3. Press START/RESUME. The dishwasher starts in the selected number of hours.
NOTE: Anytime the door is opened (such as, to add a dish), the START/RESUME button must be pressed again to
resume the delay countdown.
15
Publicité
