Clatronic PSM 3004 N Mode D'emploi page 25

The following symbols are to be found on (rechargeable) batteries containing harmful
substances:
Symbols
• Open
• Closed
Removing the Lid of the Housing
• Turn the lid slightly in an anticlockwise direction.
• Then pull the lid upwards to remove it.
Inserting the Batteries
• Remove the cover from the battery compartment.
• Insert 4 batteries of type Mignon/AA/R6 into the battery compartment. Please ensure
the correct polarity.
• Replace the cover in order to secure the batteries.
Note: With the switch you can switch the mill on and off.
Filling with Materials to be Milled
• Pull the motor section to separate it from the storage container.
• The storage container can be fi lled with peppercorns or grains of salt.
Replacing the Motor Section
• In order that the electricity can be transmitted to the lamp, the contact pins have to
engage with the contact screws on the storage container.
• Please also note that the drive fi ts on to the axle of the storage container.
Positioning the Lid
• Then position the cover of the housing such that the arrow is pointing to the
on the storage container.
05-PSM 3004 N_neu.indd 25 05-PSM 3004 N_neu.indd 25
Pb = contains lead
Cd = contains cadmium
Hg = contains mercury
Li = contains lithium
Preparation
GB
symbol
25
12.06.2009 8:28:45 Uhr 12.06.2009 8:28:45 Uhr