Publicité
Les langues disponibles
Les langues disponibles
1. Fix the grass box to the lawnmower by sliding the hooks (d) of the box in the plastic brackets (e).
2. Install the support strap (4) in the center of the lower handle bar (3) and adjust the strap length to
position the box.
Fig.3
4.4- Setting fixed blade (Fig.5)
You must set properly the blade, in order to work effectively.
WARNING! This operation requires working near the blade. For your safety, it is recommended
to wear gloves.
1. Loosen clockwise the two knobs (g).
2. As soon as the rotating blade touches the fixed blade (f), tighten the knobs (g) until the blade is
rotating without catching the fixed blade (f).
4.5- Setting the cutting height (Fig.6)
Be sure to adjust the cutting height depending on the size of the grass.
WARNING! This operation requires working near the blade. For your safety, it is recommended to:
- wear protective gloves
- block the moving blade to prevent it from turning on itself
1. Unscrew the knobs (i) on both sides of the roll.
2. Adjust the roll to the proper cutting height.
3. Make sure that both extremities of the roll are at the same height to ensure an even cut.
Fig.5
All manuals and user guides at all-guides.com
Fig.4
Fig.6
Page 17 / 28
Publicité
