Publicité
Les langues disponibles
Les langues disponibles
All manuals and user guides at all-guides.com
III. SAFETY INSTRUCTIONS
WARNING! Whenever using a tool, basic safety precautions should always be followed to reduce
the risk of injury to oneself or to others.
Carefully read all these instructions before attempting to operate this product.
Keep these instructions for future reference.
3.1- General safety instructions
1. Consider work area environment
- Do not expose tool to rain, moisture or humidity, to avoid rust.
- Work only if there is good lighting (i.e. sunlight or sufficient artificial light).
- Beware of your stability when working on wet, frozen ground or slopes.
2. Keep other persons away
- Do not let persons, especially children, not involved in the work touch the tool and keep them
away from the work area.
- Only operator or user must be in working area. Keep children, animals and spectators at a safe
distance
- Keep the product away from children or from their environment. Never allow children to operate
the tool. Children should be supervised to ensure that they do not play with the tool.
3. Store idle tools
When not in use, tools should be stored in a dry locked-up place, out of reach of children.
4. Use the right tool
- Do not force small tools to do the job of a heavy duty tool.
- Do not use tool for purposes not intended or for unsuitable purposes
- Only use the machine for the purposes described in the instructions manual
5. Dress properly – Wear proper working clothing!
- Do not wear loose clothing or jewellery; they can be caught in moving parts.
- It is recommended to wear non-slippery shoes. Never operate the machine with barefoot or open
sandals.
- Wear protective gloves.
- Wear protective hair covering to contain long hair.
6. Use protective equipment
- Use safety glasses
- Use dust protection mask if working operations create dust.
7. Do not overreach
Avoid any abnormal posture. Keep proper footing and balance at all times.
8. Maintain tools with care
- Abide by the maintenance and replacement blade regulations
- Keep cutting tools sharp and clean for better and safer performance.
- Follow instructions for lubricating and changing accessories.
- Keep handles dry, clean and free from oil and grease.
- It is your own interest to keep your machine clean at any time.
- After you finish working, check the machine for any damage.
9. Stay alert
Watch what you are doing. Use common sense. Do not operate tool when you are tired, under the
influence of alcohol, prescription medicines or drugs.
A single moment of inattention, while operating the tool, may result in injury or damage.
10. Check damaged parts
- Before further use or reuse of the tool, tool should be carefully checked to determine that it will
operate properly and perform its intended function.
- Check for alignment of moving parts, binding of moving parts, breakage of parts, mounting and
any other conditions that may affect its operation.
Page 14 / 28
Publicité
