Télécharger Imprimer la page

Ribimex RIBILAND PRTM300/1 Manuel D'instructions Et D'utilisation page 16

Publicité

Les langues disponibles

Les langues disponibles

11. Work only in daylight or under sufficient artificial light.
12. Proper use:
The user is solely responsible of others when working with the machine.
- Persons not familiar with the instructions, children, minors who have not yet reached the
minimum age to use the machine, and persons under the influence of alcohol, drugs or medications
are not allowed to operate the machine.
- Make sure that all safety devices (if any) are well assembled and in good condition.
- For a safe operation, do not operate the machine on steep slopes. Whenever using the machine on
a slope, slow down and ensure that you have proper balance.
- Hold the handle tightly, with both hands. Never use the machine only with one hand.
- Proceed walking with the lawnmower, never running. Guide the machine at slow speed. Do not
adopt abnormal positions. At all times. Maintain a proper balance.
13. Pay particular attention:
- When working on slopes. Never work in areas too steep.
- Pulling the lawnmower towards you
14. Make sure the blades stop running when:
- You tilt the lawnmower to move it over an area without grass.
- You transport the lawnmower.
15. If the machine bumps against a foreign object, examine the unit for any sign of damage and
make the necessary repairs before using the unit again.
16. Never use the lawnmower with defective blade guards or without the security features in place.
IV- GETTING STARTED
4.1- Unpacking
- Remove product from its packaging.
- Check that tool and accessories are not damage
4.2- Presentation
The lawnmower machine is delivered pre-assembled.
However, certain parts need to be assembled by the user.
4.3- Assembly
4.3.1- Assembly of the handle (Fig.2)
1. Slide the extension tubes (2) in the tube of the upper handle (1) and
secure with the provided screws & nuts.
2. Align the extension tubes (2) on the outside of the lower handle (3)
and secure with the provided screws & nuts.
4.3.2- Installation of the handle on the cylinder (Fig.3)
WARNING! This operation requires working near the blade.
For your safety, it is recommended to :
- wear protective gloves
- lock the blade
1. Adjust two holes of the lower handle (3) (one on each side) on the two
catches (c) (one on each side of the body of the lawnmower).
2. Press hard on the tubes of the handle (3) for securing to the catches
(c).
4.3.3- Installation of grass collection box (Fig.4)
Note: The grass collection box (5) must be installed before using the machine.
All manuals and user guides at all-guides.com
Fig.2
Page 16 / 28

Publicité

loading

Ce manuel est également adapté pour:

725556