Panasonic CQ-DPX33 Manuel D'utilisation page 8

Power and Sound Controls
(continued)
Changing Audio Modes
Press [SEL] to switch the audio mode in the following order.
VOLUME-»BASS-»TREBLE—►BALANCE-»FADER
t_I
Bass and Treble
4
-
• Press [SEL] to select the BASS (TREBLE) mode. Press
[a VOL] or [v VOL] to increase or decrease the bass/treble
response.
I I
-12 to 12 -12 to 12
• Press
[a.
VOL] or [v VOL] for more than 0.5 second to
change numeric levels on the display rapidly.
BR 5 S
_L
Balance
• Press [SEL] to select the BALANCE mode. Press
[a
VOL] or
[v VOL] to shift the sound volume to right or left speakers.
• Press [a VOL] or [v VOL] for more than 0.5 second to
change numeric levels on the display rapidly.
Fader
• Press [SEL] to select the FADER mode. Press
[a
VOL] or
[v VOL] to shift the sound volume to the front or rear
speakers.
■PP
or R 1 to 15 Balance Center
• Press
[a
VOL] or [v VOL] for more than 0.5 second to
change numeric levels on the display rapidly.
Note: When a control mode (BAS/TRE/BAL/FAD) is selected but no operation is made within
5 seconds (2 seconds at volume mode), the display will return to the normal operation (Radio,
CD, etc) mode. In such a case, press [SEL] again to select the control mode.
FRd
FRd
8
C0-DPX33/DP22EUC