Publicité
Les langues disponibles
Les langues disponibles
Power and Sound Controls
Power
If the car is not already running, turn the key in the ignition until
the accessory indicator lights.
Press [PWR] to switch on the power.
Press [PWR] again to switch off the power.
When power is turned off while the time is displayed, the clock
mode remains on. When the [PWR] is pressed again, the system
is completely off.
Note: When a CD is inserted with all power connected, the unit
power will automatically turn on and CD loading begins and plays.
Volume
• Press
[a
VOL] or
[v
VOL] to increase or decrease volume.
nm
u n
1
U
U L
1 u—j
Volume Level
(0 to 40)
• Press [a VOL] or [v VOL] for more than 0.5 second to
change numeric levels on the display rapidly.
Attenuator
• Press [ATT]. Volume will decrease to about Vio of its previous
level.
• Press [ATT] again to deactivate when listening at normal
volume.
Tone Enhancement
Press LOUD [L] to enhance bass and treble tones when listening
at low or medium volume. Press LOUD [L] again to deactivate.
LOUD
Note: This unit is equipped with an anti-volume-blast circuit which serves as an automatic vol¬
ume level adjuster so that you will not be deafened sudden loud volume.
This system operates as follows. When [PWR] is switched on, the volume level is low. After
that, the volume level gradually returns to its previous level prior to switching off the unit.
CQ-DPX33/DP22EUC
7
Publicité
