Clock Basics
(The clock system is 12-hours.)
Press and Hold
Initial Time Setting
©Press DISP [D], "AdJ" is displayed.
©Press and hold DISP [D] again for
more than 2 seconds, "12" blinks indi¬
cating the time setting mode is acti¬
vated.
©To set hours, press [> TUNE] or
[< TUNE].
©Press DISP [D] again for minute
setting.
©To set minutes, press [> TUNE] or
[< TUNE].
Hold [> TUNE] or [< TUNE] to
change numbers rapidly.
©When you have set the time, press
DISP [D].
Resetting the Time
When you want to reset the time, press and hold DISP [D] for
more than 2 seconds to activate the time setting mode. Then, re¬
peat steps © to © above.
Selecting the Clock Display
Press DISP [D] for clock display.
Press DISP [D] once again, the current audio display mode re¬
sumes.
When power is turned off while the time is displayed, the
clock mode remains on. When the [PWR] is pressed again,
the system is completely off.
Note: Before you leave your car that has no ACC, be sure
to switch power off.
CQ-DPX33/DP22EUC