Bluetooth Function; Replacing The Stylus - Madison MAD-RT300SP-MKII Manuel D'utilisation

Bluetooth Function

Lift up the tone arm and put it on the rest. Then the BT function is ready for pairing.
Open your Bluetooth equipment and select MAD-RT300SP in the list of found device.
Choose your favorite songs with the , , , keys .
In this mode, the turntable mode will stop automatically.
MAINTENANCE

REPLACING THE STYLUS

-Refer to the figures 1-8
1. Push the arm lock to release the tone arm.
2. Take off the cap of the cartridge to access the needle.
3. Separate slightly the cartridge from the socket.
4. Unplug the audio wire from the cartridge.
To fit a new cartridge, repeat process 3 & 4 in reverse order.
Note: Please be extremely careful whilst performing this operation so as to avoid damaging the tone arm and
audio line wires. The Turntable's cartridge needs to be replaced every 3 – 4 months after continuous playing.
Notes:
When you transport your turntable, don't forget to place the protective cap on the stylus and clip the tone arm
on the arm rest.
Electric products must not be put into household waste. Please bring them to a recycling centre. Ask your local authorities or your dealer about
the way to proceed.
©Copyright LOTRONIC 2017 MAD-RT300SP 4