Madison MAD-RT300SP-MKII Manuel D'utilisation page 2

Safety instructions
Read, follow and keep these Instructions for future reference.

Do not use this apparatus near water.

Clean only with a damp cloth.

Do not block any of the ventilation openings. Install in accordance with the manufacturer's instructions.

Do not install near nay heat sources such as radiators, heat registers, stoves, or other apparatus (including

amplifiers) that produce heat.
Protect the power cord from being walked on or pinched particularly at plug, convenience receptacles, and

point where they exit from the apparatus.
Only use attachments/accessories specified by the manufacturer.

Use only with a cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus.

Unplug this apparatus during lighting storms or when unused for long periods of time.

Refer all servicing to qualified service personnel. Serving is required when the apparatus has been damaged

in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into
the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been
dropped.
This mains plug is used as the disconnect device, the disconnect device shall be readily operable.

Description
1. Clear dust cover
2. Turntable
3. 45 rpm adaptor
4. Tone arm
5. Tone arm lift lever
6. Auto & manual stop control switch
7. Speed selection( 33/45/78)
8. Stylus cartridge
9. Speakers
10. Power ON/OFF & Volume +/-
11. RCA audio out
12. DC input power socket
INITIAL STARTING-UP
POWER CONNECTION
Connect the supplied USB lead to a PC or DC
power adapter with USB interface (output
5V~1.0A) to the DC socket (12) on the rear
panel.
©Copyright LOTRONIC 2017
GB
MAD-RT300SP 2