Télécharger Imprimer la page

SEVERIN TO 2052 Mode D'emploi page 11

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 13
Top:
30 cm
∙ The unit must not be installed inside a
cupboard; when positioning the unit,
also ensure that it is not placed directly
underneath a shelf or any other similar
object.
∙ The feet on the base of the unit must not
be removed.
∙ Do not position or operate the appliance
close to or underneath any wall-
cupboards or hanging objects such as
curtains or any inflammable materials.
∙ During operation, the appliance must
be placed on a heat-resistant surface,
impervious to splashes and stains. Do
not position the appliance on or near hot
surfaces, open flames or inflammable
vapours.
∙ Do not allow the power cord to touch
any hot parts of the appliance.
∙ Do not let the power cord hang free.
∙ Always switch off and remove the
plug from the wall socket
- after use, as well as
- in cases of malfunction, and
- during cleaning.
∙ When removing the plug from the wall
socket, never pull on the power cord;
always grip the plug itself.
∙ No responsibility is accepted if damage
results from improper use, or if these
instructions are not complied with.
∙ This appliance is intended for domestic
or similar applications, such as
- in shops, offices and other similar
working environments,
- in agricultural working environments,
- by customers in hotels, motels etc.
and similar establishments,
- in bed-and breakfast type
environments.
Before using for the first time
∙ Clean the appliance (see Cleaning
and care) and completely remove any
packing materials.
∙ Before using the appliance for the first
time, let it heat up for 15 minutes with
both heating elements (
Operation). When the appliance is
switched on for the first time, a slight
smell may be emitted. This is normal
and will only last for a very short time.
Ensure sufficient ventilation.
4-position switch
Off
Upper heat
Lower heat
Upper and lower heat
Turn the 4-position switch to the desired
setting.
The heating elements will only switch on
after the timer is activated.
Timer
The timer can be used for selecting a
certain cooking time (max 60 minutes).
To turn the unit off, turn the switch to
position 0.
To pre-programme the cooking time, turn
the switch clockwise to the desired time.
To set a time of less than 10 minutes, turn
the timer to a somewhat higher setting first
and then slowly turn it back to the desired
time setting. After the pre-programmed time
has elapsed, an acoustic signal indicates
) on (see
11

Publicité

loading