Télécharger Imprimer la page

BORETTI CFBI902AN2 Prescriptions De Montage Et Mode D'emploi page 220

Publicité

Les langues disponibles

Les langues disponibles

STORAGE COMPARTMENT
The storage compartment is accessible through the pivoting panel (fig. 7.9a).
Do not store flammable material in the oven or in the storage compartment.
REPLACING THE OVEN LAMP
WARNING: Ensure the appliance is switched off and disconnected from the electrical
power supply before replacing the lamp to avoid the possibility of electric shock.
Let the oven cavity and the heating elements to cool down.
Switch off the electrical supply.
Remove the protective cover "A" (fig. 7.9b).
Replace the halogen lamp "C" with a new one suitable for high temperatures (300°C)
having the following specifications: 230 V, 50 Hz and same power (check watt power
as stamped in the lamp itself) of the replaced lamp.

IMPORTANT
replace the bulb with bare hands;
contamination from your fingers can
cause premature failure. Always use a
clean cloth or gloves.
Refit the protective cover.
Note: Oven lamp replacement is not
B
covered by your guarantee.
The intended purpose of the lamp, fitted
on this appliance, is to illuminate the oven
cavity and thus help the user to better
A
monitor the food while cooking. This
lamp is not suitable for other usage (e.g.
environments lighting).
This product contains a light source of
energy efficiency class G.
220
WARNING:
Never
C
A
Fig. 7.9a
WRONG
CORRECT
Fig. 7.9b

Publicité

loading

Ce manuel est également adapté pour:

Cfbi902ix2Cfbi902ow2Cfbi902zw2Cfbi9015an2