Setting Mode - Esoteric G-02X Mode D'emploi

Setting mode

1
Press the MENU button.
Press the MENU button again to cycle through the setting items.
MODE>
FREQ>
DISP>
DIMMER>
PrHEAT>
o The DIMMER item only appears when DISP is set to ON.
2
Use the A and B buttons to change the settings.
For explanations of each setting, see pages 15–16.
14
10M_4>
10M_3>
10M_2>
10M_1>
MCK>
3
Press the 10MHz button to show the ordinary
display.
o If you do nothing for ten or more seconds, setting mode will
end and ordinary display will resume.
o When DISP is set to SHORT, after three seconds without
use the unit will exit setting mode and ordinary display will
resume (page 15).
o Settings are retained even when the power is turned off.