Gaggenau RF461705 Notice D'utilisation page 18

en-us
Operating the appliance
Setting the display screen
You can choose between the settings Reduced and
Standard. With the setting Reduced only the temperature
and active special functions are displayed on the control
panel after a short period without operation. If the touch
fields are touched, all keys will be visible again.
With the setting Standard all keys always remain visible.
1. Press à button to open the main menu.
Press B button to move to the menu item Basic
2.
settings.
3. Press ™ button.
Press C button to move to the menu item Display
4.
screen.
Press % button.
5.
6. Press B C buttons to move to the required setting.
Press ™ button.
7.
The setting is saved.
8. Press ' button to exit the menu.
Setting the touch field color
Press à button to open the main menu.
1.
2. Press B button to move to the menu item Basic
settings.
3. Press ™ button.
Press C button to move to the menu item Touch field
4.
color.
5. Press % button.
6. Press B C buttons to move to the required setting.
Press ™ button.
7.
The setting is saved.
Press ' button to exit the menu.
8.
Setting the touch field tone type.
You can change or switch off the sound of the tones
generated when pressing keys.
1. Press à button to open the main menu.
2. Press B button to move to the menu item Basic
settings.
3. Press ™ button to open the menu item.
Press C button to move to the menu item Touch field
4.
tone type.
18
5. Press % button to open the menu item.
Press B C buttons to select the required setting.
6.
7. Press ™ button.
The setting is saved.
Press ' button to exit the menu.
8.
Setting the touch field tone volume
You can adjust the volume level of the sounds generated
when pressing keys.
Press à button to open the main menu.
1.
2. Press B button to move to the menu item Basic
settings.
3. Press ™ button to open the menu item.
Press C button to move to the menu item Touch field
4.
tone volume.
5. Press % button to open the menu item.
6. Press B C buttons to select the required setting.
Press ™ button.
7.
The setting is saved.
Press ' button to exit the menu.
8.
Setting the signal tone volume
You can adjust the volume level of the signal tones
generated e.g. with alarms.
1. Press à button to open the main menu.
Press B button to move to the menu item Basic
2.
settings.
3. Press ™ button to open the menu item.
Press C button to move to the menu item Signal tone
4.
volume.
Press % button to open the menu item.
5.
6. Press B C buttons to select the required setting.
Press ™ button.
7.
The setting is saved.
8. Press ' button to exit the menu.