Publicité
Les langues disponibles
Les langues disponibles
installing your dryer
KEY INSTALLATION REQUIREMENTS
Hire a professional to install this dryer properly. If a service call has to be made as a result of poor installation
setup, adjustment, or connection, it is considered the responsibility of the installer. If you install the dryer,
you are responsible.
Make sure you have everything necessary for proper installation:
•
A GROUNDED ELECTRICAL OUTLET. See Electrical Requirements. See page 15.
•
A POWER CORD for electric dryers (except Canada). See page 16.
•
GAS LINES (if you are installing a gas dryer) must meet national and local codes.
•
EXHAUST SYSTEM – must be rigid metal or flexible stiff-walled metal exhaust ducting. See the ducting
and exhaust requirements on pages 10 - 11 and 13, and the dryer exhaust tips on page 20.
TOOLS NEEDED FOR INSTALLATION
Gather the required tools and parts before starting the installation.
Read and follow the instructions provided with any tools listed here.
Tools and Parts
Pliers
Level
REPLACEMENT PARTS AND ACCESSORIES
If your dryer requires replacement parts or accessories, contact the dealer from whom you purchased your
dryer or the SAMSUNG customer care center at
DV36J4000E(G)-03064D-00_EN_150414.indd Sec11:8
DV36J4000E(G)-03064D-00_EN_150414.indd Sec11:8
Cutting knife
Pipe wrench (gas only)
Phillips Screwdriver
1-800-SAMSUNG (726-7864
English - 8
Nut drivers
Duct tape
Wrench
).
2015-04-14
2015-04-14
3:52:02
3:52:02
Publicité
