Publicité
Les langues disponibles
Les langues disponibles
troubleshooting
Lint on clothes.
Garments still wrinkled after
Wrinkle Release.
Odors remain in clothing
after Air Fluff.
INFORMATION CODES
Information codes may be displayed to help you better understand what is occurring with your dryer.
ERROR DISPLAY
tE
HE
dE
dF
bE2
FE
AE
For any codes not listed above, call 1–800–726–7864 (1–800–SAMSUNG)
DV36J4000E(G)-03064D-00_EN_150414.indd Sec7:30
DV36J4000E(G)-03064D-00_EN_150414.indd Sec7:30
•
Make sure the lint filter is cleaned before every load. With some loads
that produce high amounts of lint, it may be necessary to clean the
filter during the cycle.
•
Some fabrics are lint producers (for example, a fuzzy white cotton
towel) and they should be dried separately from clothes that are lint
trappers (for example, a pair of black linen pants).
•
Divide larger loads into smaller loads for drying.
•
Check pockets thoroughly before washing and drying clothes.
•
Small loads of 1 to 4 items work best.
•
Load fewer garments.
•
Load similar-type garments.
•
Fabrics having strong odors should be washed in a normal cycle
before you dry them.
MEANING
Lint Screen Vent is clogged and
restricted.
Invalid heating Temp when the dryer
is running.
Running the dryer with door open
Door is not closing properly
Unit detects a button is being
pressed for over 30 secs or button
is stuck
Invalid power source frequency
Electronic Control Problem
(Communication Error.)
English - 30
SOLUTION
Clean the screen or vent.
If the problem continues, call for service.
Call for service.
Close the door and then restart.
If the problem continues, call for service.
Call for service.
Make sure a button is NOT being pressed
continuously. Try restarting the cycle.
If the problem continues, call for service.
Try restarting the cycle.
If the problem continues, call for service.
Call for service.
2015-04-14
2015-04-14
3:52:04
3:52:04
Publicité
