Publicité
Fourth, press on the factory reset button for 15 seconds.
Q2:
I am not sure what type of Internet Account Type I have for my Cable/DSL
connection. How do I find out?
A2:
Contact your Internet Service Provider's (ISP) support service for the correct
information.
Q3:
I configured my router with my ISP settings, but I can not get onto the
Internet. What should I do?
A3:
First, verify that you can get onto the Internet with a direct connection into your
modem. Second, contact your ISP and verify all the information that you have in
regards to your Internet connection settings is correct. Third, power cycle your
modem and router. Unplug the power to the modem and router. Wait 30
seconds, and then reconnect the power to the modem. Wait for the modem to fully
boot up, and then reconnect the power to the router.
Q4:
All the settings are correct, but I can not make a wireless connection to the
Router. What should I do?
A4:
First, double check that the WLAN (2.4GHz/5GHz) light on the Wireless
Router is lit. Second, power cycle the TEW-671BR. Unplug the power to the
TEW-671BR. Wait 15 seconds, then plug the power back in to the TEW-671BR.
Third, contact the manufacturer of your wireless network adapter and make sure
the wireless network adapter is configured with the proper SSID. The preset SSID
of the Access Point is TRENDnet671N (2.4GHz) and TRENDnet671A (5GHz).
If you still encounter problems or have any questions regarding the TEW-671BR, please
contact TRENDnet's Technical Support Department.
2. Click Internet Protocol (TCP/IP) and
then click Properties. Then click on
Obtain an IP address automatically.
8
Publicité
