Publicité
Les langues disponibles
Les langues disponibles
3. DESCRIPTION OF THE APPLIANCE
4. INSTALLATION INSTRUCTIONS
Before using this appliance
▪
Remove the exterior and interior packing.
▪
Before connecting the appliance to the power source, let it stand upright for
approximately 24 hours. This will reduce the possibility of a malfunction in the cooling
system from handling during transportation.
▪
Clean the interior surface with lukewarm water using a soft cloth.
▪
When disposing your appliance, please choose an authorized disposal site.
▪
Place your wine cooler on a floor that is strong enough to support it when it is fully loaded.
To level your Wine cooler, adjust the front leveling leg at the bottom of the wine cooler.
▪
Adequate ventilation is required, do not block the front air outlet.
▪
This wine cellar is designed for free-standing only, in no case it must be installed in
a built-in or embeddable way. For a good functionality of the device it is imperative to
leave a good air circulation all around the device. We do not take responsibility for failure
to comply with the installation instructions.
▪
Connect the appliance to a single socket, leaving enough space for ventilation around
the appliance. Be careful to support it, so that your wine cellar is perfectly level (use of a
spirit level is recommended). This will prevent any movement due to instability, causing
noise and vibration, and will ensure that the door seals perfectly.
▪
This appliance is intended to be used exclusively for the storage of wine.
▪
This appliance is using flammability refrigerant. So never damage the cooling pipe work
1
2
3
4
5
6
28
Body
Wooden shelves
Adjustable feet
Upper hinge
Integrated handle
Glass door
Publicité
