Publicité
Les langues disponibles
Les langues disponibles
Hi Temp Scrub
Select this option to increase the target water temperature during
the wash portions of the cycle. Hi Temp Scrub raises the target
water temperature
to 145°F (63°C), in the main wash. In the Anti
Bacterial and Pots Pans cycles, Hi Temp Scrub also raises the
target water temperature to 135°F (57°C) in the pre-wash.
Heating the water helps improve washing results. Hi Temp Scrub
is useful when loads contain baked-on food.
This option adds heat and wash time to the cycle. When Hi Temp
Scrub is used with the Anti Bacterial and Pots Pans cycles, water
is also added to the cycle.
o
S,
\ _2Y
NOTE: Hi Temp Scrub is an option with Anti Bacterial, Pots Pans
and Normal Wash.
Sani Rinse
Select this option to raise the water temperature
in the final rinse
to approximately
155°F (68°C). Sani Rinse adds heat and time to
the cycle. The high temperature
rinse sanitizes your dishes and
glassware in accordance
with NSF/ANSI Standard 184 for
Residential Dishwashers. Certified residential dishwashers
are
not intended for licensed food establishments.
To turn on the Lock
Press and hold
K'A,I"
LOCKON
for 4 seconds. LOCK ON glows.
If you press any pad while your dishwasher is locked, the light
flashes 3 times.
To turn off the Lock
Press and hold AIR DRY for 4 seconds. The light turns off.
Delay Hours
Select this option to run your dishwasher at a later time or during
off-peak hours. You can add items to the load anytime during the
delay countdown. After adding items, close the door firmly until it
latches. The delay countdown
will not continue if the door is not
latched.
•
You can delay the start of a cycle up to 24 hours.
•
The first time you use Delay Hours, you will see
NOTE: The Anti Bacterial cycle automatically
uses this option.
Sani Rinse is an option with SmartWash, Pots Pans, and Normal
Wash. Only these sanitization cycles have been designed to meet
the NSF/ANSl requirements.
Air Dry
Select this option to dry without heat. Air drying is useful when
loads contain plastic dinnerware that may be sensitive to high
temperatures.
o
LOCK O N
The dishes take longer to dry and some spotting can occur. For
best drying, use a liquid rinse aid. Some items (such as plastics)
may need towel drying.
NOTE: Air Dry is an option with all cycles, except Quick Rinse.
Lock On
Use the Lock On to prevent unintended
use of the dishwasher.
You can also use the lock feature to prevent unintended
cycle or
option changes during a cycle.
8
LOCKON
When LOCK ON is lit, all buttons are disabled.
NOTES:
•
The dishwasher
door can be opened while the controls are
locked.
•
You can turn on the Lock while the dishwasher
is running.
showing a 1-hour delay.
To delay the start
1. Close the door.
2. Select a wash cycle and options.
3. Repeatedly press
_OURS
until you see the desired hours of delay in the display.
When the delay reaches 24 hours, the delay turns off. Press
DELAY HOURS again to select a new number of delay hours.
4. Press START.
NOTE: To cancel the delay and cycle, press CANCEL/DRAIN. To
cancel the delay and start the cycle immediately, press START
again.
Follow the progress of your dishwasher with the Cycle Status
indicators.
O
O
O
O
O
Rinse Aid Empty
Fill the Rinse Aid dispenser when RINSE AID EMPTY is lit. A rinse
aid prevents water from forming droplets that can dry as spots or
streaks. If the Rinse Aid dispenser is empty, the light glows when
you select a cycle or while a cycle is running.
16
Publicité
