Publicité
Les langues disponibles
Les langues disponibles
TIMER MODE
Note:
The alarm function is only available during
7
mains operation, it is disabled during battery
use.
Setting the alarm times
1
Press »ON/OFF« to switch on the device.
– Display: e.g. »B5 AKT«.
2
Open the menu with »MENU«.
3
Select the option »SYSTEM« with
ING
+« and confirm by pressing
ATS«.
4
Select the option »ALARM« with
+« and confirm by pressing »SEL/i/ATS«.
– Display: »ALARM« flash.
5
Press »SEL/i/ATS«, select Timer On (»ON«)
»– TUNING
+« and confirm by pressing
with
»SEL/i/ATS«.
– Display: e.g. »6 : 00 AM«.
6
Set the hours with
firm by pressing »SEL/i/ATS«.
7
Set the minutes with
firm by pressing »SEL/i/ATS«.
8
Select the desired alarm day (Daily, Once,
Weekends or Weekdays (Mo – Fr)) with
TUNING
+«.
Notes:
If the alarm is set to „Once" continue with
7
step 9.
Otherwise, end settings with step 12.
7
9
»– TUNING
Set the day with
by pressing »SEL/i/ATS«.
10
Set the month with
firm by pressing »SEL/i/ATS«.
11
Set the year with
»– TUNING
12
Press »SEL/i/ATS« to end the setting.
– Display: »SAVED«.
--------------------------------------------------------------------------------------------------------------------------
»– TUN-
»SEL/i/
»– TUNING
»– TUNING
+« and con-
»– TUNING
+« and con-
+« and confirm
»– TUNING
+« and con-
+«.
Alarm with signal tone
1
Set the alarm signal tone (»e«) using
§
»e
« to position »e«.
– Display: »e«.
– The alarm goes on with a signal tone at the
set time.
Alarm with radio station
1
Select the radio alarm (»
§
to position »
§
– Display: »
– The radio switches on to the last listened radio
station at the set alarm time
Interrupting the alarm
1
Press »SNOOZE« while the alarm is sounding.
– Display: »e« or »
– The alarm (signal tone or radio) stops.
– The alarm goes on again in 5-minute inter-
vals (the total alarm time is 90 minutes).
Cancelling alarm stand-by
1
Press »ON/OFF« while the alarm is sounding.
– Display: the current time and »e« or »
– The alarm (signal tone or radio) stops, but
the alarm function remains activated for the
next day at the same time.
»–
Activating and deactivating the
alarm
1
Press »ON/OFF« to switch off the device.
2
Press »MODE/AL« to deactivate the alarm
stand-by.
– Display: »OFF« and »e« or »
pears.
– The set alarm time is saved
3
Press »MODE/AL« to reactivate the alarm
stand-by.
– Display: »ON« and »e« or »
§
«) using
»e
«.
«.
§
« flash.
§
« disap-
§
«.
ENGLISH
§
«
§
«.
23
Publicité
