Lea LE36255-60DR Mode D'emploi page 9

into the fuel tank.
 Unscrew the plug and fill the tank with fuel. Use a gauge funnel to filter the
fuel.
 Tightly screw on the plug by hand only.
 Clean around the screw plug and the tank after refuelling.
 Always wipe up any spilt fuel to prevent a fire.
Storage of fuel
 Fuel cannot be stored for an unlimited period of time.
 Purchase only the quantity required for a 4‐week operating period.
 Use approved fuel storage containers only.
OPERATION
Starting the engine
Move at least 3 metres away from the place of refuelling. Place the hedge trimmer
on a clean area of ground and make sure that the cutting tool does not come into
contact with the ground or any other objects.
Keep the blades clear of everything around, since they will start moving as
soon as the engine starts.
Cold starting
If the engine is cold or if it has been stopped for more than 5 minutes or if fuel has
been added to the engine.
1) Push the switch (11) to the "on" position.
2) Push the primer pump gently (7 to 10 times) until fuel begins to flow into it.
GB
7