Télécharger Imprimer la page

Hiltron security FBX2 Mode D'emploi page 5

Publicité

Les langues disponibles

Les langues disponibles

security
Made in Italy
BT2014/35/UE
EMC2014/30/UE
Packing content
2 aluminum columns respectively Tx / Rx of the infrared barrier
Plastic case with the control card of the infrared barriers
2 caps with fairlead hole used for wires connection
Envelope containing the plugs for a correct installation
Installation manual and user's guide
Functional features
Install on doors, windows and perimetral protections
Microprocessor operation for system supervision
Anti-bugs feature with single beam or more beams via dip-switch
Aluminum housing and polycarbonate anti-UV cover
Antitearing protection magnetic tamper (Tx / Rx)
Connection by bus to 3 cables
Response Time breakage beams adjustable via dip-switch
Tecnical features
Power supply voltage
Max current consumption
Consumption min
Number of infrared beams
Maximum operating gap
Box protection level
Operating temperature
Barriers Dimensions (L)
Barriers Dimensions (A)
Barriers Dimensions (P)
Dimensions interface unit (L)
Dimensions interface unit (A)
Dimensions interface unit (P)
Installation
Don't install devices near to trees or plants
Don't install devices near reflecting surfaces, because this could prevent the correct operation.
Don't install devices where they could be wet from water or mud.
Don't install devices where they could suddenly be exposed to an intense light (es. car headlight or sunbeams; if it is
inevitable, mounting the transmitter in front of the sunbeams and not the receiver).
Don't install devices where animals or objects can accidentally interrupt the beams.
The wind won't directly cause false alarms, but it could induce leaves or similar objects to fly or to fluctuate in the beams.
Looking for a correct place:
a.
The transmitter and the receiver can be installed to any angulations provided that the sensors are parallel,
make sure that they are installed in the same verse (the connection cables have to escape from the same
extremity both from the receiver than from the transmitter).
b.
If more sensors have to be installed to form longer beams, don't install the receiver near to the transmitter.
c.
The distance between the transmitter and the receiver doesn't have to be superior to the maximum one (see
characteristics).
Mounting the transmitter and the receiver in a way that water doesn't enter the holes for wires. In the case it is inevitable
using some silicone.
*Protect your infrared barrier from dampness or wet weather, such as rain, snow, and fog
FBX2-FBX4-FBX6-FBX8
Indoor/outdoor* infrared barrier sensor with
Lead free
Lead free
Lead free
Lead free
Pb
Pb
Pb
Pb
RoHS
RoHS
RoHS
RoHS
compliant
compliant
compliant
compliant
FBX2 FBX4
9Vdc ÷ 14,5Vdc
90mA
100mA
60mA
70mA
2
4
8m (internal);16m (external)
IP43
0°C ÷ +40°C
24mm
500mm
1000mm 1500mm 2000mm
26mm
69mm
61mm
28mm
2 / 4 / 6 / 8 beams
FBX6
FBX8
110mA
130mA
80mA
95mA
6
8
5
1

Publicité

loading

Ce manuel est également adapté pour:

Fbx4Fbx6Fbx8